How to use NiteAura

Please check before first use

During your first use, you may experience the following

This is a normal reaction intended by the design.

NiteAura promotes nasal breathing by design, 

with silicone mouth and nose covers that help maintain warm and humid air for comfortable breathing.

The mouth cover is designed to make mouth breathing more difficult, while the nose cover encourages easier nasal breathing. Inside,

a micro fan actively draws in fresh external air through the nose and quickly releases exhaled air, helping to naturally guide nasal breathing.

During initial use, users may experience slight discomfort or a sense of restriction due to the limited ability to breathe through the mouth. However, this is an intentional part of the design to promote the formation of a nasal breathing habit.

Through this structure, NiteAura gradually reduces reliance on mouth breathing

and helps maintain a healthier, more stable breathing state—even during sleep.

Try starting this way for your first use.

For a smooth start, we provide step-by-step tips to help you ease into it.

Follow the guide below and adapt comfortably at a pace that suits you.

You may experience positive changes such as improved nasal health,

better sleep quality, and a natural shift toward nose breathing with continued use.

If you feel any discomfort, we recommend temporarily pausing use

and starting again with short sessions during the day.

01. How to use

Put the nose and mouth silicone covers together.

Attach the silicone covers to the device.

Attach the head strap.

Press the power button once to turn on the device.
(The green LED will blink when the device is on.) 

Wear the device properly on your head.

Adjust the strap length to fit your head.

Connet the app.

The green LED will stay solid once

the connection is successful.  

Tap Start Sleep on the app

to begin the operation. 

Tap End Sleep to stop the operation.

Allow permissions for a Seamless Experience

Without these permissions, some features may not work properly.

02. Getting Ready to Use the Product

                                                             STEP 1) Assemble the silicone parts.

Make sure the perforated side of the mouth silicone mask is facing upward.

Align and connect the nose and mouth silicone masks.

                                                             STEP 2) Connect the silicone parts to the device.

Insert the silicone masks into the grooves on the device.

                                                             STEP 3) Secure the nose silicone mask in place.

Secure the nose silicone mask by fitting it into the air vent slot.

                                                             STEP 4) Secure the strap in place.

Insert the strap into the hole on the device wing and pull it.

You’ll hear a click sound when it’s securely fastened.

Choose the strap that best fits you.

Single Strap

Dual Strap

Choose between the single or dual strap, and wear it as shown in the illustration.

03. Use Without Mobile App (Standalone Mode)

1) How to Enter Standalone Mode

Press the operation button twice while the device is powered on to enter Standalone Mode.

2) How to Set Operating Mode and Start Options

The operating mode and start options set in the app are applied to standalone mode as well.

You can change the settings by connecting to the app and accessing the settings screen.

3) EasyStart Feature (Sleep-on-Wear)

*EasyStart is a convenient feature that automatically starts sleep tracking when the device is worn, without needing to use the app.

How to Use EasyStart

                                            STEP 1

Turn on the device and wait until the green light blinks.

If you turn on the device after wearing it, it may not accurately measure the room’s temperature and humidity.

Please power on the device first, and wear it after the green light starts blinking.

                                                           STEP 2

Please put on the device when the green light starts blinking.

Do not connect to the mobile app while in EasyStart mode.

                                               STEP 3

Once you wear the device, sleep recording will start automatically without launching the app.

                                                STEP 4

After waking up, press and hold the device button to power it off.

When you reconnect the device to the app, the sleep data will be saved to the app.

Note: If you re-enter EasyStart mode (by wearing the device again) after ending sleep,

the previous sleep data will be deleted and a new session will begin. 

4) Auto-Recovery Feature (Seamless Sleep Continuation)

Even in unexpected interruptions, your sleep data remains intact. If the app is forcibly closed or the device encounters an error,

NiteAura automatically reboots and resumes the previous sleep session.

In cases where the session cannot continue due to low battery or prolonged non-wear,

the current session is saved and the device powers off automatically.

Because the session is automatically saved, connecting the device to the mobile app the next day will restore the sleep data

and directly take you to the Report tab to view the details.

5) Record Limit

In standalone mode, only the most recent sleep session is saved, and previous records are deleted.

Since only the last session is synchronized when connecting with the app,

we recommend linking the device to the app the following day after use.

02. NiteAura App  [NiteAura]

Please find NiteAura App 'NiteAura' from Google play Store/iOS App Store.

Explore NiteAura

When NiteAura powers on and the green light is blinking,

it indicates that the device is ready to connect to the app.

03. Modes and Start Options 

In the Setting tab, you can set up both Operation Modes and Start Options.

* By default, the device operates in AI Mode, unless you make any changes.

04. How to Keep the Device Clean

01) Cleaning the silicone covers 

Detach the silicone covers from the device.  

Wash the silicone covers with water, dry them thoroughly, and reattach them.

02) Cleaning mode 

Performing the cleaning mode in 'Setting' will drain any remaining humidity

and dust within the device. Place the NiteAura horizontal and run the cleaning mode.  

* You can also activate cleaning mode by long-pressing the device button for 8 seconds.

05. Product Usage Tips 

06. Waring

1. Please note that the NiteAura is not waterproof. Make sure the product does not get into the water when using it. 

2. In the case of children, use it under the supervision of a parent or guardian. 

3. Please do not use NiteAura for any purpose other than tracking sleep-related breathing data and humidifying. 

4. Any issues that may arise as a result of a user's negligence are not the responsibility of the manufacturer or seller. 

5. Do not subject the product to excessive force. 

6. Avoid using the product with wet hands while charging a battery to prevent the risk of electric shock. 

7. Handle the product with care to avoid drops, as this may reduce the lifespan of the product or battery, 

   and could result in damage or failure. 

8. Do not keep the product to excessively high/low temperatures, as this may cause damage or reduce battery life. 

9. Ensure that damaged cables, chargers, or batteries (e.g., frayed insulation, broken or malfunctioning chargers, etc.) are not used. 

10. If you experience problems with breathing, stop using the product and contact a medical professional

      for diagnosis and treatment. 

11. If you experience any skin irritation or rash, stop using the device immediately and clean it thoroughly before using it again. 

     If necessary, contact a medical professional for diagnosis and treatment. 

12. This manual may be updated periodically and is subject to change.